» SPECIFICATION


 

Professional in every sense! Performance, build, audio andoperation

– 5W output power, 136-174MHz full VHF coverage

– Professional RF performance, resistance to interference

– 750mW* loud and intelligible audio with BTL amplifier 
and large 36mm speaker
* Typical value with internal speaker.

– IP54 and MIL-STD-810 rugged construction

– Large capacity Li-Ion battery pack provides 18.5 hours* 
of operating time
* Typical operation. 5:5:90 duty cycle with auto power save.

– Wide/narrow channel spacing

– Integrated VOX function

– 200 channels

– Built-in CTCSS and DTCS encoder/decoder

– 5 character alphanumeric display

– Priority, memory and skip scanning

– 16 DTMF autodial memories

– Repeater lockout and busy channel lockout

– Time-out-timer

– Power save function and auto power off

– PC programmable (with optional CS-G80)

– Transceiver-to-transceiver cloning (with optional OPC-474)

General

 

IC-G80

Frequency range
136MHz–174MHz
Number of channels
200 channels
Channel spacing
12.5kHz/25kHz
Type of emission
F2D/F3E
Current drain Tx 1.4A (5W)
Rx Stand-by
60mA typ.
Max. audio
300mA (Internal SP)
Dimensions (W×H×D)
(Projections are not included)
58×112×30 mm
Weight
140g (Without battery pack)
360g (With BP-264 and antenna)

Transmitter

 

IC-G80

RF output power (at 7.2V DC)
5.0/2.5/0.5W (High/Mid/Low)
Spurious emissions
Less than -70dB
Frequency stability
±2.5ppm

Receiver

 

IC-G80

Sensitivity (at 12dB SINAD)
0.18μV typ.
Adjacent channel selectivity (W/N)
72/65dB typ.
Spurious & Image rejection
80dB typ.
Intermodulation rejection
72dB typ.
AF output power
(at 5% distortion )
Internal SP
(With 16Ω load)
750mW typ.
External SP 
(With 8Ω load)
420mW typ.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard
MIL-810 F
Method, Proc.
Low Pressure Storage
500.4 I
Low Pressure Operation
500.4 II
High Temperature Storage
501.4 I
High Temperature Operation
501.4 II
Low Temperature Storage
502.4 I
Low Temperature Operation
502.4 II
Temperature Shock
503.4 I
Solar Radiation
505.4 I
Rain Blowing
506.4 I
Rain Drip
506.4 III
Humidity Induced
507.4
Salt Fog
509.4
Dust Blowing
510.4 I
Vibration
514.5 I
Shock Functional
516.5 I
Shock Transit Drop
516.5 IV

Also meets equivalent MIL-STD-810 -C, -D and -E.

Ingress Protection Standard

Dust & Water
IP54 (Dust-protection and water resistant)